Tag Archives: supplier gearbox

China supplier R Series Foot Mounted Coaxial Gearbox with Standard Motor with Flange Connection automatic gearbox

Product Description

R Series Foot Mounted Coaxial Gearbox with Standard Motor with Flange Connection

R Series reducers are designed and manufactured on the basis of modular combination system.
 

Small size, light weight, large transmission torque, superior performance, stable operation, low noise, durable, can be installed in a variety of ways, can be matched with different types of motors, a wide range of applications. sewage treatment, chemical industry, pharmacy and other industries. 

There are a lot of motor combinations, installation forms and structural schemes. The transmission ratio is classified and fine to meet different operating conditions, and the performance is superior.

Reinforced high rigid cast iron box; The hardened gear is made of high-quality alloy steel. Its surface is carburized, quenched and hardened, and the gear is finely ground. It has stable transmission, low noise, and large bearing capacity. Low temperature rise, long service life. It is widely used in metallurgy,1. Features: small offset output, compact structure, maximum use of box space, use of integral casting box, good stiffness, can improve the strength of the shaft and bearing life.
 

1.Technical data:

Product Name R Series Foot Mounted Coaxial Gearbox with Standard Motor with Flange Connection
Gear material 20CrMnTi alloy steel
Color Blue Silver  Customerized 
Case Material   Cast iron HT200 
Gear Processing   Grinding finish by HOFLER Grinding Machines
Noise Test Below 65dB
Brand of bearings C&U bearing, ZWZ,LYC, HRB, CHINAMFG ,etc
Brand of oil seal NAK or other brand
Temp. rise (MAX) 40ºC  
Temp. rise (Oil)(MAX 50ºC  
Vibration ≤20µm
Housing hardness HBS190-240
Surface hardness of gears HRC58°~62 °
Gear core hardness HRC33~40
Machining precision of gears 5 Grade
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Heat treatment Carburizing, Quenching etc
Efficiency 95%~96% (depends on the transmission stage)
Backlash ≤20Arcmin  

2. Installation type and output mode:
    bottom seated type and large and small flange type installation, CHINAMFG shaft output.

3. Input mode:
    direct motor, shaft input and connecting flange input.

4. Reduction ratio:
    single <5,secondary 5~24.8, tertiary 27.2~264, R/R combination up to 18125.

5. Average efficiency:
    Class II 96%, Class III 95%, R/R combination 85%.

6.Technical parameters:
    Coaxial output 
    Power: 0.12KW~160KW  
    Torque: 1.4N · m ~ 23200N · m  
    Output speed: 0.06 ~ 1090r/min

7. Model of R series reducer:
    R37, 47, 57, 67, 77, 87, 97, 107,137, 147, 167,177

Detailed Photos

 

Certifications

 

Packaging & Shipping

 

Installation Instructions

Company Profile

< ABOUT TILI

< WORKSHOP
 

< QUALITY CONTROL

 

 

FAQ

 

Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of reducer.

Q 2:Can you do OEM?
A:Yes, we can. We can do OEM  for all the customers .if you want to order NON-STANDERD speed reducers,pls provide Drafts, Dimensions,      Pictures and Samples if possible.

Q 3: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances. 

Q 4: Do you have inspection procedures for reducer?
A:100% self-inspection before packing. 

Q 5: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory. 

Q 6:How to choose a gearbox? What if I don’t know which gear reducer I need?
A:You can refer to our catalogue to choose the gearbox or we can help to choose when you provide,the technical information of required output torque, output speed and motor parameter etc. Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.

Q 7: What information shall we give before placing a purchase order?
A:a) Type of the gearbox, Size , Transmission Ratio, input and output type, input flange, mounting position, motor information and shaft deflection etc. b)Housing color.c) Purchase quantity. d) Other special requirements

Q 8:What is the payment term?
A:You can pay via T/T(30% in advance as deposit before production +70% before delivery

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step
Customization:
Available

|

Customized Request

agricultural gearbox

Impact of Gear Ratios on Machinery Performance in Agricultural Gearboxes

The gear ratio in agricultural gearboxes plays a crucial role in determining the performance of machinery. It directly affects the relationship between the input and output speeds and torques. Here’s how gear ratios influence machinery performance:

  • Speed and Torque Conversion: Gear ratios allow for the conversion of speed and torque between the input and output shafts. Higher gear ratios can reduce output speed while increasing output torque, making it suitable for tasks requiring high power.
  • Power and Efficiency: Gear ratios affect the efficiency of power transmission. While reducing the speed through higher gear ratios can increase torque, it’s essential to strike a balance to maintain efficiency. Lower efficiency can lead to energy loss and increased heat generation.
  • Task Adaptability: Different agricultural tasks require varying levels of torque and speed. Gear ratios enable machinery to be adaptable to different tasks by providing the necessary torque for heavy-duty activities like plowing or tilling and higher speeds for tasks like transport.
  • Optimal Performance: Selecting the appropriate gear ratio ensures that machinery operates within its optimal performance range. It prevents overloading the engine or the gearbox, contributing to smoother operation and reduced wear and tear.
  • Productivity and Fuel Efficiency: Proper gear ratios can enhance the overall productivity of agricultural machinery. By optimizing torque and speed, tasks can be completed efficiently, reducing the time and fuel consumption required for operations.
  • Consideration of Terrain: Different terrains and field conditions require adjustments in gear ratios. Steep slopes or heavy soil may necessitate lower gear ratios for increased torque, while flat terrain could benefit from higher ratios for faster operation.
  • Impact on Components: Gear ratios can influence the load distribution on gearbox components. Higher gear ratios might subject components to increased forces and stresses, potentially affecting their lifespan.
  • Operator Comfort: Proper gear ratios contribute to operator comfort by providing the necessary power for smooth operation without straining the machinery. This can lead to reduced operator fatigue and improved safety.
  • Customization: Some modern agricultural equipment offers adjustable or variable gear ratios, allowing operators to fine-tune machinery performance based on specific tasks and conditions.

Choosing the right gear ratio for agricultural gearboxes involves considering factors such as the intended task, soil conditions, and equipment specifications. It’s essential to strike a balance between torque and speed to achieve optimal machinery performance and maximize productivity.

agricultural gearbox

Specific Safety Precautions for Agricultural Gearbox Operation

Operating agricultural machinery with gearboxes requires careful attention to safety to prevent accidents and ensure the well-being of operators and bystanders. Here are some specific safety precautions associated with agricultural gearbox operation:

  • Read the Manual: Familiarize yourself with the manufacturer’s manual for the specific gearbox and machinery. It provides valuable information about proper operation, maintenance, and safety guidelines.
  • Proper Training: Ensure that operators are trained in the safe operation of the machinery, including how to engage and disengage the gearbox, adjust speeds, and handle emergencies.
  • Protective Gear: Operators should wear appropriate protective gear, such as helmets, gloves, safety goggles, and sturdy footwear, to reduce the risk of injury from debris, moving parts, or other hazards.
  • Clear Workspace: Before operating the machinery, clear the area of obstacles, debris, and bystanders. Ensure a safe distance between the machinery and people.
  • Secure Attachments: If the gearbox is used in conjunction with attachments, ensure that they are properly secured and mounted according to manufacturer guidelines to prevent detachment during operation.
  • Engage Safely: Engage the gearbox and start the machinery only after ensuring that all personnel are at a safe distance and that the machinery is on stable ground.
  • Avoid Loose Clothing: Operators should avoid wearing loose clothing or accessories that could get caught in moving parts.
  • Emergency Stops: Familiarize yourself with the location of emergency stop buttons and switches on the machinery and be prepared to use them if needed.
  • Regular Maintenance: Perform routine maintenance checks on the gearbox and machinery to ensure that all components are in proper working condition. Replace worn parts and lubricate components as recommended by the manufacturer.
  • Shut Down Properly: When finishing a task, disengage the gearbox, shut off the machinery, and engage any safety locks to prevent accidental starts.

Following these safety precautions can greatly reduce the risk of accidents and injuries when operating agricultural machinery with gearboxes. Always prioritize safety to create a secure working environment for everyone involved.

agricultural gearbox

Power Transmission in Farming Equipment with Agricultural Gearboxes

Agricultural gearboxes play a vital role in facilitating power transmission within various types of farming equipment. These gearboxes are integral components that enable the transfer of rotational power from a tractor’s engine to different agricultural implements and machinery. Here’s how agricultural gearboxes contribute to power transmission:

  • Speed Reduction: In many farming operations, the engine of a tractor or other power source operates at a higher speed than is suitable for the optimal functioning of agricultural implements. Agricultural gearboxes provide speed reduction by using a combination of gears with different numbers of teeth. This reduction in speed allows the machinery to operate at the required speed for efficient tasks like tilling, planting, or harvesting.
  • Power Multiplication: Some agricultural tasks require a significant amount of torque to operate effectively. Gearboxes can multiply the input torque from the engine to generate higher torque at the output shaft. This is crucial for tasks such as plowing, where substantial force is needed to break up the soil.
  • Directional Change: Agricultural gearboxes also allow for changes in the direction of power transmission. For instance, a tractor’s power take-off (PTO) shaft may need to transmit power at a right angle to the tractor’s engine. Gearboxes with bevel gears or other arrangements enable this change in direction, ensuring that power is properly directed to the implement.
  • Power Distribution: In certain cases, power needs to be distributed to multiple components or implements. Agricultural gearboxes with multiple output shafts can distribute power to different tasks simultaneously, optimizing efficiency and productivity.
  • Attachment Operation: Many agricultural implements, such as plows, seed drills, and rotary mowers, require consistent and controlled power to function effectively. Gearboxes provide the necessary power and control to these attachments, ensuring uniform operation and accurate results.

By facilitating speed reduction, power multiplication, directional changes, power distribution, and attachment operation, agricultural gearboxes contribute significantly to the overall efficiency and productivity of farming equipment. They allow farmers to adapt their machinery to various tasks, optimize power usage, and achieve better results in different agricultural operations.

China supplier R Series Foot Mounted Coaxial Gearbox with Standard Motor with Flange Connection   automatic gearbox	China supplier R Series Foot Mounted Coaxial Gearbox with Standard Motor with Flange Connection   automatic gearbox
editor by CX 2024-01-30

China supplier Wpa 1400rpm Involute Spur Gear Speed Gearbox Wp Series Worm Flange Output Wpo Single Reducer Gear Box with high quality

Product Description

Factory high quality WP series 90 degree worm reduction gear box for electric motor

Features:
1. Different variants, both input and output shafts can be mounted horizontally or vertically

2. Compact structure

3. Direct drive or indirect drive available

4. Output could be CHINAMFG shaft or hollow hole

Product Parameters

Model Ratio

10

15

20

25

30

40

50

60

40

0.4

0.33

0.26

0.24

0.22

0.16

0.14

o.12

50

0.65

0.52

0.40

0.37

0.34

0.27

0.24

0.20

60

1.00

0.82

0.65

0.59

0.54

0.45

0.40

0.32

70

1.60

1.35

1.10

0.96

0.82

0.67

0.61

0.52

80

2.20

1.78

1.36

1.28

1.20

0.90

0.80

0.75

100

3.60

3.10

2.60

2.35

2.10

1.68

1.30

1.00

120

5.20

4.35

3.50

3.25

3.00

2.20

1.90

1.50

135

9.75

7.85

6.00

5.50

5.00

3.69

2.89

2.30

147

10.71

8.43

6.18

5.71

5.23

3.84

3.09

2.52

155

12.80

9.90

7.00

6.53

6.00

4.40

3.61

3.00

175

17.30

13.60

10.00

9.13

8.30

6.18

4.85

4.07

200

22.60

18.20

13.86

12.75

11.67

8.78

6.71

5.58

250

33.20

27.40

21.60

20.00

18.43

14.00

10.43

8.62

Product Description

Product Description

(1)Worm gear reducer is a power transmission mechanism, the use of gear speed converter, the motor (motor) the number of rotation to slow down to the number of rotation, and get a larger torque mechanism. At present, the application of speed reducer is widely used in the mechanism of transmitting power and motion.

(2)In all kinds of mechanical transmission system can see traces of it, from the transport ships, automobiles, motorcycles, construction heavy machinery, industrial machinery processing equipment and automated production equipment, to the common daily life appliances, clocks and watches, and so forth. Its application from the transmission of large power, to a small load, the precision of the angle of transmission can be seen in the application, and in industrial applications, the reducer has a reduction and increase the torque function. So it is widely used in speed and torque conversion equipmen

 

The role of main reducer:

1, reduce speed and increase the output torque, torque output ratio of motor output by the deceleration ratio, but should pay attention to not exceed the speed reducer rated torque.
2, deceleration while reducing the load inertia, inertia is reduced to the square of the reduction ratio. We can look at the General Motors has a value of inertia.

 

 

 

Company Profile

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Electric Cars, Motorcycle, Agricultural Machinery, Car, Power Transmission
Layout: Three-Ring
Hardness: Hardened Tooth Surface
Installation: Torque Arm Type
Type: Worm Gear Box
Customized Support: OEM, ODM, Obm
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

agricultural gearbox

Contribution of Agricultural Gearboxes to Farming Machinery Versatility

Agricultural gearboxes play a pivotal role in enhancing the overall versatility of farming machinery. Here’s how they contribute:

  • Variable Speeds: Agricultural gearboxes enable machinery to operate at different speeds, allowing farmers to adapt to various tasks. For instance, tractors equipped with adjustable gearboxes can efficiently switch between plowing, seeding, and harvesting.
  • Torque Management: Gearboxes control torque delivery to match the requirements of different operations. This ensures optimal power transmission and prevents overloading during tasks like tilling or lifting heavy loads.
  • Multi-Functionality: Many farming machines are designed to perform multiple tasks. By incorporating versatile gearboxes, these machines can efficiently switch between functions without requiring major modifications.
  • Attachment Compatibility: Farm machinery often requires attachments like mowers, plows, or sprayers. Agricultural gearboxes can be designed to accommodate various attachments, increasing the machinery’s utility and adaptability.
  • Adjustable Ratios: Some gearboxes allow operators to change gear ratios on-the-fly. This adaptability is essential for tasks that demand precise control over speed and torque, such as precision planting or spraying.
  • Efficient Power Distribution: Gearboxes help distribute power from the engine to different components of the machinery, such as wheels, axles, and implements. This efficient power distribution ensures effective utilization of energy.
  • Task-Specific Optimization: Different farming tasks have specific requirements. Agricultural gearboxes can be tailored to optimize machinery performance for tasks ranging from soil preparation to crop maintenance.
  • Enhanced Maneuverability: Gearboxes can enable machinery to change directions easily and navigate tight spaces. This is especially valuable in tasks like plowing fields or maneuvering within orchards.
  • Adapting to Terrain: Versatile gearboxes allow machines to adapt to different terrains, ensuring consistent performance on various surfaces like hills, slopes, or uneven ground.
  • Seasonal Flexibility: Farming involves seasonal tasks that vary in demand and complexity. Gearboxes offer the flexibility to optimize machinery for specific tasks during different seasons, enhancing overall efficiency.

Agricultural gearboxes are a cornerstone of farming machinery versatility, enabling farmers to accomplish a wide range of tasks efficiently and effectively.

agricultural gearbox

Common Signs of Gearbox Wear and Their Solutions

Gearboxes, like any mechanical components, can experience wear over time due to factors such as friction, load, and operating conditions. Recognizing the common signs of gearbox wear is essential for timely maintenance and avoiding potential breakdowns. Here are some signs to watch out for and the solutions to address them:

  • Unusual Noises: Grinding, clicking, or whining noises during operation can indicate worn gears or bearings. Inspect the gearbox for damaged teeth or inadequate lubrication. Replace damaged components and ensure proper lubrication.
  • Increased Vibration: Excessive vibration suggests misalignment or imbalance within the gearbox. Check for proper alignment and balance the components if necessary. Also, inspect for worn or damaged shafts or bearings.
  • Leakage: Oil or lubricant leaks may indicate worn seals or gaskets. Replace seals and gaskets to prevent leakage and ensure adequate lubrication.
  • Slipping Gears: Gears slipping out of engagement or difficulty shifting can point to worn or damaged gear teeth. Inspect gears for signs of wear or chipping, and replace as needed.
  • Temperature Increase: Abnormal heat generation can result from increased friction due to worn parts. Check lubrication levels and quality, and replace worn bearings or gears causing excess friction.
  • Decreased Performance: Reduced power transmission or output efficiency can indicate wear in the gearbox. Inspect gears, bearings, and other components for signs of wear and replace as necessary.
  • Excessive Play: Excessive play or backlash in gears can indicate worn gear teeth or bearings. Inspect components for wear, adjust backlash, and replace worn parts.

Addressing gearbox wear requires routine maintenance, including proper lubrication, alignment checks, and regular inspections. Timely replacement of worn or damaged components can extend the gearbox’s lifespan and maintain optimal performance in various applications.

agricultural gearbox

Types of Agricultural Gearboxes for Specific Tasks

Various types of agricultural gearboxes are designed to cater to specific tasks and applications in farming. These gearboxes are engineered to meet the unique requirements of different agricultural machinery and operations. Some common types of agricultural gearboxes include:

  • Rotary Mower Gearboxes: These gearboxes are used in rotary mowers and cutters. They transmit power from the tractor’s power take-off (PTO) to the blades, enabling efficient cutting of grass, crops, and vegetation.
  • Manure Spreader Gearboxes: Manure spreaders utilize specialized gearboxes to distribute manure evenly across fields. These gearboxes ensure consistent spreading of fertilizer while accommodating variable loads.
  • Harvesting Gearboxes: Gearboxes used in harvesting equipment, such as combines and harvesters, enable efficient gathering, threshing, and separating of crops from their stalks. These gearboxes handle high loads and varying operating conditions.
  • Seed Drill Gearboxes: Seed drills require gearboxes to distribute seeds accurately and at consistent intervals. These gearboxes ensure precise seed placement for optimal germination and crop growth.
  • Hay Rake Gearboxes: Hay rakes utilize gearboxes to gather and arrange hay into windrows for baling. These gearboxes help optimize the hay collection process.
  • Irrigation System Gearboxes: Agricultural irrigation systems may use gearboxes to control the movement and positioning of irrigation equipment, ensuring efficient water distribution across fields.
  • Tillage Equipment Gearboxes: Gearboxes used in tillage equipment, such as plows and cultivators, help break up soil, prepare seedbeds, and promote seedling emergence.
  • Tractor Gearboxes: Tractors may incorporate various gearboxes for tasks such as shifting gears, driving the power take-off, and operating attachments.
  • Grain Auger Gearboxes: Grain augers use gearboxes to facilitate the movement of harvested grain from one location to another, such as from a combine to a storage bin.

Each type of agricultural gearbox is designed with specific features, load capacities, and durability to suit the demands of its intended task. Manufacturers engineer these gearboxes to withstand the challenging conditions of agricultural operations while ensuring efficient and reliable performance.

China supplier Wpa 1400rpm Involute Spur Gear Speed Gearbox Wp Series Worm Flange Output Wpo Single Reducer Gear Box   with high quality China supplier Wpa 1400rpm Involute Spur Gear Speed Gearbox Wp Series Worm Flange Output Wpo Single Reducer Gear Box   with high quality
editor by CX 2024-01-08

China supplier Nmrv30 Nmrv40 Right Angle 90 Degree Worm Gear Reductor Worm Gearbox gearbox and motor

Product Description

NMRV30 NMRV40 Right Angle 90 Degree Worm Gear Reductor Worm Gearbox  

Features:
1. Light in weight and non-rusting
2. Smooth in running, can work a long time in dreadful conditions
3. High efficiency, low noise
4. Good-looking in appearance, durable in service life, and small in volume

Product photo:

Specification for worm reduction:

Model 571 ~ 150
Power 0.06kw ~ 15kw
Input speed 750rpm ~ 2000rpm
Reduction ratio 1/5 ~ 1/100
Input motor AC (1 phase or 3 phase) / DC / BLDC / Stepper / Servo
Output shaft Solid shaft / Hollow shaft / Output flange…
Dimension standard Metric size / Inch size
Material of housing die-cast aluminum / Cast iron / Stainless steel
Accessories Flange / CHINAMFG shaft / Torque arm / Cover …

FAQ
Q: Can you make the reduction with customization?
A: Yes, we can customize per your request, like flange, shaft, configuration, material, etc.

Q: Do you provide samples?
A: Yes. The sample is available for testing.

Q: What is your MOQ?
A: It is 10pcs for the beginning of our business.

Q: What’s your lead time?
A: Standard products need 5-30 days, a bit longer for customized products.

Q: Do you provide technical support?
A: Yes. Our company has a design and development team, we can provide technical support if you
need.

Q: How to ship to us?
A: It is available by air, sea, or train.

Q: How to pay the money?
A: T/T and L/C are preferred, with different currencies, including USD, EUR, RMB, etc.

Q: How can I know if the product is suitable for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.

Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.

Q: How shall we contact you?
A: You can send an inquiry directly, and we will respond within 24 hours.

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|

Order Sample

1 PC
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

agricultural gearbox

Impact of Gear Ratios on Machinery Performance in Agricultural Gearboxes

The gear ratio in agricultural gearboxes plays a crucial role in determining the performance of machinery. It directly affects the relationship between the input and output speeds and torques. Here’s how gear ratios influence machinery performance:

  • Speed and Torque Conversion: Gear ratios allow for the conversion of speed and torque between the input and output shafts. Higher gear ratios can reduce output speed while increasing output torque, making it suitable for tasks requiring high power.
  • Power and Efficiency: Gear ratios affect the efficiency of power transmission. While reducing the speed through higher gear ratios can increase torque, it’s essential to strike a balance to maintain efficiency. Lower efficiency can lead to energy loss and increased heat generation.
  • Task Adaptability: Different agricultural tasks require varying levels of torque and speed. Gear ratios enable machinery to be adaptable to different tasks by providing the necessary torque for heavy-duty activities like plowing or tilling and higher speeds for tasks like transport.
  • Optimal Performance: Selecting the appropriate gear ratio ensures that machinery operates within its optimal performance range. It prevents overloading the engine or the gearbox, contributing to smoother operation and reduced wear and tear.
  • Productivity and Fuel Efficiency: Proper gear ratios can enhance the overall productivity of agricultural machinery. By optimizing torque and speed, tasks can be completed efficiently, reducing the time and fuel consumption required for operations.
  • Consideration of Terrain: Different terrains and field conditions require adjustments in gear ratios. Steep slopes or heavy soil may necessitate lower gear ratios for increased torque, while flat terrain could benefit from higher ratios for faster operation.
  • Impact on Components: Gear ratios can influence the load distribution on gearbox components. Higher gear ratios might subject components to increased forces and stresses, potentially affecting their lifespan.
  • Operator Comfort: Proper gear ratios contribute to operator comfort by providing the necessary power for smooth operation without straining the machinery. This can lead to reduced operator fatigue and improved safety.
  • Customization: Some modern agricultural equipment offers adjustable or variable gear ratios, allowing operators to fine-tune machinery performance based on specific tasks and conditions.

Choosing the right gear ratio for agricultural gearboxes involves considering factors such as the intended task, soil conditions, and equipment specifications. It’s essential to strike a balance between torque and speed to achieve optimal machinery performance and maximize productivity.

agricultural gearbox

Handling Varying Torque Demands with Agricultural Gearboxes

Agricultural gearboxes are designed to handle the varying torque demands associated with different tasks in farming operations. The torque requirements can vary based on factors such as the type of task, the soil conditions, the terrain, and the machinery’s speed. Agricultural gearboxes are equipped with features that allow them to adapt to these varying torque demands:

  • Gear Ratio Selection: Agricultural gearboxes often come with multiple gear ratios, allowing operators to select the appropriate ratio for the task at hand. Lower gear ratios provide higher torque for tasks that require more force, such as plowing or tilling, while higher gear ratios offer higher speeds for tasks like mowing or transporting.
  • Torque Multiplier: Some agricultural gearboxes are designed with torque multipliers that enhance the torque output from the engine to the wheels or implement. These multipliers are engaged when higher torque is needed, helping the machinery handle heavy loads or challenging terrain.
  • Adjustable Speeds: Many agricultural gearboxes allow operators to adjust the speed of the machinery to match the torque requirements of the task. This flexibility is essential for tasks that involve both high-torque, low-speed operations and high-speed operations with lower torque needs.
  • Power Take-Off (PTO) Options: Agricultural gearboxes often feature power take-off mechanisms that enable the transfer of power from the engine to attached implements. These mechanisms can be designed to provide varying torque outputs to suit different implements, such as rotary tillers, balers, or pumps.

The ability of agricultural gearboxes to handle varying torque demands is crucial for ensuring efficient and effective farming operations. By offering adjustable gear ratios, torque multipliers, and adaptable speeds, these gearboxes empower farmers to optimize their machinery’s performance based on the specific requirements of each task.

agricultural gearbox

Key Features of a Durable and Reliable Agricultural Gearbox

A durable and reliable agricultural gearbox is crucial for the efficient operation of farming equipment and machinery. The following key features contribute to the durability and reliability of agricultural gearboxes:

  • High-Quality Materials: Agricultural gearboxes are often exposed to harsh conditions, including dust, debris, and varying weather. Using high-quality materials, such as strong alloy steels, can enhance the gearbox’s resistance to wear, corrosion, and other forms of deterioration.
  • Rugged Construction: The gearbox should have a robust and rugged construction to withstand the stresses and strains associated with agricultural tasks. Reinforced housings, precision machining, and robust seals can help prevent damage and ensure longevity.
  • Effective Lubrication System: Proper lubrication is vital to reduce friction, dissipate heat, and prevent premature wear. Agricultural gearboxes should be equipped with efficient lubrication systems that ensure all components are adequately lubricated, even during extended operation.
  • Sealing and Protection: Dust, dirt, and moisture are common challenges in agricultural environments. Effective sealing mechanisms, such as gaskets and seals, prevent contaminants from entering the gearbox and protect internal components from damage.
  • Heat Dissipation: The gearbox should be designed to dissipate heat effectively, especially during prolonged operation. Overheating can lead to lubrication breakdown and premature wear. Cooling fins and adequate ventilation can help maintain optimal operating temperatures.
  • Gear Quality and Precision: High-quality gears with accurate tooth profiles and precision manufacturing ensure smooth and efficient power transmission. Properly machined gears reduce noise, vibration, and the risk of gear failures.
  • Advanced Gear Design: Some agricultural gearboxes may feature advanced gear designs, such as helical or planetary gears. These designs offer improved efficiency, reduced noise, and increased load-bearing capacity compared to traditional spur gears.
  • Overload Protection: Incorporating overload protection mechanisms, such as shear pins or clutch systems, can prevent damage to the gearbox and other connected components in case of sudden high loads or jams.
  • Easy Maintenance Access: The gearbox should be designed with maintenance in mind. Accessible inspection points, drain plugs, and fill ports make it easier for operators to perform routine maintenance tasks.

Manufacturers often engineer agricultural gearboxes to meet these requirements, ensuring that they can withstand the demanding conditions of farming operations and contribute to the reliable performance of agricultural machinery.

China supplier Nmrv30 Nmrv40 Right Angle 90 Degree Worm Gear Reductor Worm Gearbox   gearbox and motor	China supplier Nmrv30 Nmrv40 Right Angle 90 Degree Worm Gear Reductor Worm Gearbox   gearbox and motor
editor by CX 2024-01-02

China supplier Industrial&Crane Heavy Duty Helical Transmission Motor Gearbox Reducer with Hot selling

Product Description

Product Description
 

QYJ series gearbox could be divided into QYJH parallel shaft

and QYJB 90° shaft,
from 1 stage to 4 stages.

 

Technical data:

Gear ratio:      1.25 ~ 450

Rated output torque:  20 ~ 500 KN·m

Motor power:     1.1 ~ 200 KW

Mounting position: horizontal, vertical, and upright mounting.

Product Show

 

Package

Plastic bag + wooden carton

Company  Profiles

     
-We are a leading gear motor manufacturer
ZHangZhoug Xihu (West Lake) Dis.hai Reducer is a leading manufacturer of gear motors and gearboxes.
Since 1991, we have specialized in manufacturing a wide range of gear motors and gearboxes including:
 

  • helical gear motor
  • helical bevel gear motor
  • parallel shaft helical gear motor
  • helical worm gear motor
  • hoist drive
  • heavy-duty helical gearbox
  • heavy-duty helical bevel gearbox
  • gear motor for the car parking system
  • spiral bevel gearbox

Certificate

FAQ

Q: Can you print other colors?
Yes. Customized colors can be printed on the gear motor according to your requirements.
Q: Is that the factory price?
Yes. We assure you all prices are based on the factory.
Q:  What is the lifespan? what is the guarantee
The lifespan of a gear motor can reach 5-20 years depending on different working conditions. The guarantee time is 1 year after delivery.
Q: What documents are available?
A full range of documents including structural drawings, packing list, installation manual, and relative certificates can be provided. Moreover, customs declaration is provided. We provide a one-stop service for you. 
Q: Is it able to customize?
yes, we could re-design and produce the gear motor for your request if the total or plHangZhou quantity is enough.

Application: Motor, Machinery, Marine, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Shunting
Gear Shape: Conical – Cylindrical Gear
Step: Three-Step

agricultural gearbox

Contribution of Agricultural Gearboxes to Farming Machinery Versatility

Agricultural gearboxes play a pivotal role in enhancing the overall versatility of farming machinery. Here’s how they contribute:

  • Variable Speeds: Agricultural gearboxes enable machinery to operate at different speeds, allowing farmers to adapt to various tasks. For instance, tractors equipped with adjustable gearboxes can efficiently switch between plowing, seeding, and harvesting.
  • Torque Management: Gearboxes control torque delivery to match the requirements of different operations. This ensures optimal power transmission and prevents overloading during tasks like tilling or lifting heavy loads.
  • Multi-Functionality: Many farming machines are designed to perform multiple tasks. By incorporating versatile gearboxes, these machines can efficiently switch between functions without requiring major modifications.
  • Attachment Compatibility: Farm machinery often requires attachments like mowers, plows, or sprayers. Agricultural gearboxes can be designed to accommodate various attachments, increasing the machinery’s utility and adaptability.
  • Adjustable Ratios: Some gearboxes allow operators to change gear ratios on-the-fly. This adaptability is essential for tasks that demand precise control over speed and torque, such as precision planting or spraying.
  • Efficient Power Distribution: Gearboxes help distribute power from the engine to different components of the machinery, such as wheels, axles, and implements. This efficient power distribution ensures effective utilization of energy.
  • Task-Specific Optimization: Different farming tasks have specific requirements. Agricultural gearboxes can be tailored to optimize machinery performance for tasks ranging from soil preparation to crop maintenance.
  • Enhanced Maneuverability: Gearboxes can enable machinery to change directions easily and navigate tight spaces. This is especially valuable in tasks like plowing fields or maneuvering within orchards.
  • Adapting to Terrain: Versatile gearboxes allow machines to adapt to different terrains, ensuring consistent performance on various surfaces like hills, slopes, or uneven ground.
  • Seasonal Flexibility: Farming involves seasonal tasks that vary in demand and complexity. Gearboxes offer the flexibility to optimize machinery for specific tasks during different seasons, enhancing overall efficiency.

Agricultural gearboxes are a cornerstone of farming machinery versatility, enabling farmers to accomplish a wide range of tasks efficiently and effectively.

agricultural gearbox

Handling Varying Torque Demands with Agricultural Gearboxes

Agricultural gearboxes are designed to handle the varying torque demands associated with different tasks in farming operations. The torque requirements can vary based on factors such as the type of task, the soil conditions, the terrain, and the machinery’s speed. Agricultural gearboxes are equipped with features that allow them to adapt to these varying torque demands:

  • Gear Ratio Selection: Agricultural gearboxes often come with multiple gear ratios, allowing operators to select the appropriate ratio for the task at hand. Lower gear ratios provide higher torque for tasks that require more force, such as plowing or tilling, while higher gear ratios offer higher speeds for tasks like mowing or transporting.
  • Torque Multiplier: Some agricultural gearboxes are designed with torque multipliers that enhance the torque output from the engine to the wheels or implement. These multipliers are engaged when higher torque is needed, helping the machinery handle heavy loads or challenging terrain.
  • Adjustable Speeds: Many agricultural gearboxes allow operators to adjust the speed of the machinery to match the torque requirements of the task. This flexibility is essential for tasks that involve both high-torque, low-speed operations and high-speed operations with lower torque needs.
  • Power Take-Off (PTO) Options: Agricultural gearboxes often feature power take-off mechanisms that enable the transfer of power from the engine to attached implements. These mechanisms can be designed to provide varying torque outputs to suit different implements, such as rotary tillers, balers, or pumps.

The ability of agricultural gearboxes to handle varying torque demands is crucial for ensuring efficient and effective farming operations. By offering adjustable gear ratios, torque multipliers, and adaptable speeds, these gearboxes empower farmers to optimize their machinery’s performance based on the specific requirements of each task.

agricultural gearbox

Key Features of a Durable and Reliable Agricultural Gearbox

A durable and reliable agricultural gearbox is crucial for the efficient operation of farming equipment and machinery. The following key features contribute to the durability and reliability of agricultural gearboxes:

  • High-Quality Materials: Agricultural gearboxes are often exposed to harsh conditions, including dust, debris, and varying weather. Using high-quality materials, such as strong alloy steels, can enhance the gearbox’s resistance to wear, corrosion, and other forms of deterioration.
  • Rugged Construction: The gearbox should have a robust and rugged construction to withstand the stresses and strains associated with agricultural tasks. Reinforced housings, precision machining, and robust seals can help prevent damage and ensure longevity.
  • Effective Lubrication System: Proper lubrication is vital to reduce friction, dissipate heat, and prevent premature wear. Agricultural gearboxes should be equipped with efficient lubrication systems that ensure all components are adequately lubricated, even during extended operation.
  • Sealing and Protection: Dust, dirt, and moisture are common challenges in agricultural environments. Effective sealing mechanisms, such as gaskets and seals, prevent contaminants from entering the gearbox and protect internal components from damage.
  • Heat Dissipation: The gearbox should be designed to dissipate heat effectively, especially during prolonged operation. Overheating can lead to lubrication breakdown and premature wear. Cooling fins and adequate ventilation can help maintain optimal operating temperatures.
  • Gear Quality and Precision: High-quality gears with accurate tooth profiles and precision manufacturing ensure smooth and efficient power transmission. Properly machined gears reduce noise, vibration, and the risk of gear failures.
  • Advanced Gear Design: Some agricultural gearboxes may feature advanced gear designs, such as helical or planetary gears. These designs offer improved efficiency, reduced noise, and increased load-bearing capacity compared to traditional spur gears.
  • Overload Protection: Incorporating overload protection mechanisms, such as shear pins or clutch systems, can prevent damage to the gearbox and other connected components in case of sudden high loads or jams.
  • Easy Maintenance Access: The gearbox should be designed with maintenance in mind. Accessible inspection points, drain plugs, and fill ports make it easier for operators to perform routine maintenance tasks.

Manufacturers often engineer agricultural gearboxes to meet these requirements, ensuring that they can withstand the demanding conditions of farming operations and contribute to the reliable performance of agricultural machinery.

China supplier Industrial&Crane Heavy Duty Helical Transmission Motor Gearbox Reducer   with Hot selling		China supplier Industrial&Crane Heavy Duty Helical Transmission Motor Gearbox Reducer   with Hot selling
editor by CX 2023-11-18

China high quality Truck Shaft Drive Transmissions Gearbox System For Sale near me supplier

OE NO.: 123
Warranty: 1 yr
Vehicle Product: all
Product Identify: Transmission
Design Number: 0AM
Application: Car Transmission Elements
Automobile Make: Vw Audi
Quality: one hundred%analyzed
OEM NO: 41300-39260
Packing: Neutral Packing
Materials: Steel
OE Number: Transmission Clutch Friction
MOQ: 50pcs
Packaging Details: Polish and Nude

Truck Shaft Push Transmissions Gearbox Method For Sale Specification itemvalueOE NO.123Warranty1 yearPlace of OriginAfghanistanCar ModelallProduct NameTransmissionModel Number0AMApplicationAuto Transmission PartsCar MakeVw AudiQuality100%testedOEM NO41300-39260PackingNeutral PackingMaterialMetalOE NumberTransmission Clutch FrictionMOQ50pcs Organization Profile ZheJiang CZPT Auto Sale Co.,Ltd. established in 2005 is 1 of the experienced companies of various trailers. Built-in creation, scientific study & improvement and skilled product sales groups, all these positive aspects can offer the complete provider of trailers, semi-trailers, tractor head, dump truck, engineering machinery and trailer parts, our business is a foremost company in this industry, Suspension Handle Arm Bushing 52 0571 55AB52 0571 55AD suit for JEEP GRAND CHEROKEE with annual export price CZPT above 50million dollars and income nearly 600 million yuan RMB.With high common machinery and computerized products, effective R&D team and elite revenue group, We have developed a prolonged company relationship with a lot of globe renowned enterprises such asSINOTRUKSHACMANFAWDFACXUGONG GroupLIUGONG GroupSEM Group etc.Besides mature after-sale methods, we can satisfy different demands of buyers the two property and overseas. one. Are you a Manufacture or Trading Business? We are producer and buying and selling firm of vehicle parts, we have been in this line for far more than 15 many years. two.What types of parts can you source? Shock absorber Stabilizer Url, Tie Rod Stop, Rack Stop, Ball Joint Bearing CV Joint, Travel Shaft Fan Belt/Timing Belt Most than 1, Manufacturing unit Outlet Tailored HV700 Aluminum Surface Therapy Slat Sort Growth Air Shaft 000 objects in inventory 3. What is your production Guide Time? 1-7working days for items in stock 30 days for mass generation 4. What is your payment way? We acknowledge payment by western union, T/T, L/C. Usually, 30% deposit in advance, 70% harmony before cargo. 5. What other support can you offer? OEM services, we are always warmly welcome shopper to send us sample to develop a new merchandise line. Personalized provider, we can aid to design your packing. BellaWhatsApp /Wechat Number:18853171590E-mail Handle:bella@sinotrucksale.comIf you require any components,truck or trailer,engineering equipment,new or utilised, Tiny pulley 624zz pulleys for sale rope pulley wheels pls speak to me at any time!!!I will give you the lowest value with the greatest top quality.

Driveshaft framework and vibrations related with it

The composition of the push shaft is crucial to its performance and trustworthiness. Drive shafts usually incorporate claw couplings, rag joints and common joints. Other push shafts have prismatic or splined joints. Understand about the distinct kinds of drive shafts and how they function. If you want to know the vibrations linked with them, study on. But initial, let us determine what a driveshaft is.
air-compressor

transmission shaft

As the demand on our cars continues to boost, so does the desire on our travel systems. Greater CO2 emission specifications and stricter emission standards increase the pressure on the travel method while enhancing comfort and ease and shortening the turning radius. These and other negative consequences can place considerable tension and use on elements, which can direct to driveshaft failure and increase automobile basic safety risks. As a result, the generate shaft need to be inspected and changed routinely.
Based on your design, you may possibly only want to replace a single driveshaft. However, the value to replace both driveshafts ranges from $650 to $1850. Moreover, you might incur labor fees ranging from $140 to $250. The labor price will depend on your vehicle product and its drivetrain sort. In basic, however, the expense of changing a driveshaft ranges from $470 to $1850.
Regionally, the automotive driveshaft market place can be divided into four significant markets: North America, Europe, Asia Pacific, and Relaxation of the Planet. North The usa is predicted to dominate the market, whilst Europe and Asia Pacific are expected to increase the quickest. Furthermore, the industry is envisioned to grow at the optimum fee in the long term, pushed by financial progress in the Asia Pacific location. Additionally, most of the autos offered globally are developed in these areas.
The most important attribute of the driveshaft is to transfer the electricity of the engine to useful function. Generate shafts are also identified as propeller shafts and cardan shafts. In a motor vehicle, a propshaft transfers torque from the engine, transmission, and differential to the front or rear wheels, or the two. Due to the complexity of driveshaft assemblies, they are essential to car basic safety. In addition to transmitting torque from the motor, they need to also compensate for deflection, angular adjustments and duration alterations.

kind

Different types of generate shafts incorporate helical shafts, equipment shafts, worm shafts, planetary shafts and synchronous shafts. Radial protruding pins on the head offer a rotationally safe connection. At least one particular bearing has a groove extending alongside its circumferential length that permits the pin to go through the bearing. There can also be two flanges on every single end of the shaft. Relying on the software, the shaft can be mounted in the most hassle-free location to function.
Propeller shafts are generally made of substantial-top quality steel with high specific energy and modulus. Nonetheless, they can also be made from innovative composite materials such as carbon fiber, Kevlar and fiberglass. An additional type of propeller shaft is manufactured of thermoplastic polyamide, which is stiff and has a higher strength-to-weight ratio. Both travel shafts and screw shafts are utilized to travel automobiles, ships and motorcycles.
Sliding and tubular yokes are frequent parts of push shafts. By style, their angles have to be equal or intersect to offer the correct angle of operation. Unless the doing work angles are equivalent, the shaft vibrates 2 times per revolution, causing torsional vibrations. The very best way to stay away from this is to make confident the two yokes are appropriately aligned. Crucially, these factors have the same operating angle to make sure clean electrical power circulation.
The type of push shaft varies in accordance to the variety of motor. Some are geared, although other folks are non-geared. In some cases, the push shaft is fastened and the motor can rotate and steer. Alternatively, a flexible shaft can be utilised to manage the pace and direction of the travel. In some purposes exactly where linear power transmission is not attainable, adaptable shafts are a beneficial choice. For case in point, versatile shafts can be employed in moveable gadgets.
air-compressor

place up

The development of the push shaft has several benefits over bare metal. A shaft that is adaptable in several directions is less complicated to maintain than a shaft that is rigid in other directions. The shaft body and coupling flange can be made of distinct supplies, and the flange can be produced of a diverse content than the primary shaft body. For instance, the coupling flange can be produced of steel. The primary shaft body is if possible flared on at minimum a single conclude, and the at minimum a single coupling flange contains a initial usually frustoconical projection extending into the flared finish of the primary shaft physique.
The standard stiffness of fiber-primarily based shafts is reached by the orientation of parallel fibers along the duration of the shaft. Even so, the bending stiffness of this shaft is diminished due to the change in fiber orientation. Since the fibers proceed to travel in the same path from the initial conclude to the 2nd stop, the reinforcement that increases the torsional stiffness of the shaft is not influenced. In contrast, a fiber-primarily based shaft is also versatile since it employs ribs that are around 90 levels from the centerline of the shaft.
In addition to the helical ribs, the generate shaft one hundred may possibly also have reinforcing aspects. These reinforcing components preserve the structural integrity of the shaft. These reinforcing components are known as helical ribs. They have ribs on both the outer and internal surfaces. This is to stop shaft breakage. These elements can also be formed to be adaptable enough to accommodate some of the forces created by the push. Shafts can be made utilizing these methods and created into worm-like generate shafts.

vibration

The most widespread trigger of push shaft vibration is improper installation. There are 5 frequent varieties of driveshaft vibration, every connected to set up parameters. To avert this from going on, you must recognize what triggers these vibrations and how to correct them. The most common sorts of vibration are shown below. This write-up describes some frequent generate shaft vibration answers. It could also be useful to think about the advice of a expert vibration technician for travel shaft vibration control.
If you are not certain if the difficulty is the driveshaft or the engine, try turning on the stereo. Thicker carpet kits can also mask vibrations. Nevertheless, you must get in touch with an expert as shortly as achievable. If vibration persists after vibration-associated repairs, the driveshaft wants to be changed. If the driveshaft is nonetheless below warranty, you can fix it by yourself.
CV joints are the most typical result in of third-buy driveshaft vibration. If they are binding or fail, they need to be replaced. Alternatively, your CV joints may possibly just be misaligned. If it is loose, you can verify the CV connector. Another frequent lead to of drive shaft vibration is improper assembly. Poor alignment of the yokes on each ends of the shaft can cause them to vibrate.
Incorrect trim top can also trigger driveshaft vibration. Appropriate trim top is essential to prevent push shaft wobble. Regardless of whether your automobile is new or aged, you can carry out some basic fixes to minimize problems. 1 of these answers involves balancing the travel shaft. First, use the hose clamps to connect the weights to it. Following, attach an ounce of weight to it and spin it. By carrying out this, you minimize the frequency of vibration.
air-compressor

value

The worldwide driveshaft marketplace is anticipated to exceed (xxx) million USD by 2028, developing at a compound yearly progress charge (CAGR) of XX%. Its soaring progress can be attributed to a number of factors, including escalating urbanization and R&D investments by leading market players. The report also includes an in-depth examination of key market place developments and their impact on the industry. In addition, the report gives a extensive regional examination of the Driveshaft Market place.
The price of replacing the generate shaft is dependent on the variety of fix needed and the trigger of the failure. Typical repair costs variety from $three hundred to $750. Rear-wheel travel cars typically price much more. But entrance-wheel push vehicles value significantly less than 4-wheel travel autos. You might also select to try out repairing the driveshaft your self. Even so, it is essential to do your analysis and make certain you have the needed instruments and products to execute the occupation appropriately.
The report also addresses the aggressive landscape of the Travel Shafts marketplace. It consists of graphical representations, in depth statistics, management policies, and governance components. Furthermore, it includes a detailed expense evaluation. Additionally, the report offers views on the COVID-19 market place and foreseeable future traits. The report also provides useful details to support you choose how to contend in your sector. When you get a report like this, you are including reliability to your perform.
A top quality driveshaft can enhance your match by ensuring distance from the tee and enhancing responsiveness. The new material in the shaft building is lighter, stronger and more responsive than ever just before, so it is getting to be a crucial portion of the driver. And there are a assortment of alternatives to go well with any budget. The major factor to take into account when purchasing a shaft is its high quality. Even so, it truly is crucial to be aware that high quality does not appear cheap and you ought to often select an axle based on what your spending budget can handle.

China high quality Truck Shaft Drive Transmissions Gearbox System For Sale  near me supplier China high quality Truck Shaft Drive Transmissions Gearbox System For Sale  near me supplier